Most Common Pipe Leak Causes in Residential Properties

Pipe leakage is one of the most common household issues due to which water is wasted in huge quantities. Moreover, pipe leakage results in various problems like bad odor in the house, growth of bacteria and fungus, leads to loss of paint over the walls, and structural damage to the house infrastructure. Water leaks can be easily detected and Local Plumbers Bethesda MD uses several methods such as scratching through the walls or using thermal imaging technology to know exact leak spots.

Below, we will outline some of the most common causes of pipe leaks and tell you appropriate solutions.

Pipe Leak Causes

  1. Loose connections 

The most common cause of the pipe leak problem is a loose connection between two ends. This ends up causing water patches over the walls. 

  1. Dripping faucets 

This usually happens due to the over-tightening of the tap which results in wear and tears in water caps. Water dripped from faulty faucets can damage the floor. Both the issues including the loose connections as well as dripping faucets require just one visit of your Local Plumbers Bethesda MD.

  1. Pipes Aged

If the plumbing system is old then it can cause discoloration. Rusted pipes are easily broken and can cause pipe leaks which will further lead to water patches and usually vegetation starts to take place in such areas.

  1. Temperature change

Climate change or say temperature change can also cause contraction and expansion of the pipes which can further lead to pipe damage. This problem usually occurs in hilly areas.

  1. Clogged Pipes

Clogged pipes are also a primary reason for pipe bursts. Extra pressure strain causes damage to pipes and any local plumbing expert can help you with unclogging. 



Pipe Leak Effects

  1. Unhygienic- An unhygienic condition such as bacterial growth and fungal growth can occur as a result of an undetected water leak.

  2. Deterioration of walls-  Paint is scratched off the wall, water patches result in deterioration of wall decor. Avoid it by placing the high-quality, robust pipes under the walls and place them carefully.

  3. Decay of doors and windows- swollen windows and doors which are hard to open and close can be the result of a water leak.

  4. Damage to electrical wiring can lead to a short circuit or may cause accidents.

Pipe Leak Measures

  1. Regularly check the water pressure otherwise extra strain on the pipes could lead to a burst opening of the pipe.

  2. Insulate the pipes to prevent leakage, to make the connections between pipes more secure and leak-proof.

  3. Connections should be tight (not over tight) enough to hold the bond.

Conclusion

Leaks are the most insidious problem of house repair. Bathroom equipment can be expensive considering you cannot change it every then and now. So, they need to be taken care of like other household equipment. Regular check on water leakage is vital to keep the house free of fungal and bacterial growth. Other than the expense they are more of an inconvenience and Local Plumbers Bethesda MD can help you. So it’s better to keep the water supply off until the problem is fixed. 


Comments

Popular posts from this blog

Why Perform Regular Home Plumbing Inspections?

Which Plumbing Material to Pick for Your Home Plumbing Installations

Hire Plumber Services in Bethesda MD